Enlarge Image

Description:

Application

• Use for Illustration, large areas high gloss acrylic colors, washes & weathering using acrylic paints.

• Airbrushing acrylics, thinned acrylics, airbrush colors, Testor Spraying acrylics

• A320, A430, A470, 1000S, 2000S, 3000S

• 
  15-40 PSI 1.1-2.8 Bar
  
  
  
  
  
  • This nozzle has a Castle shaped tip. Castellations are added to the tip to protect the needle (that protrudes from the center) from damage, without the castellations the needle is more exposed. Castellations can catch over spray and it can build up on the inside of the air-cap. If paint builds up too much it can bend the airflow and the spay pattern becomes distorted. Ultimately the paint flow can become completely blocked. This phenomenon of paint build up is more rapid in water-based paints due to the larger pigment particles and the fact that they dry so fast. Be sure to use 50496 Acrylic Paint Thinner to clean out wet paint. If the paint has dried use 50497 Acrylic Airbrush Paint Cleaner to clean your nozzles. Blowing the thinner/cleaner through the open side port where your color cup or bottle would be can do this. You can also soak your nozzle in Acrylic Cleaner.